3M Scotchcal ElectroCut 7125 and 7725: fire rating
Every fire result 3M publishes for this film, the substrate the specimen was mounted on, and whether each rating is a test of this product. Best evidence basis across its rows: Tested — the basis is per row, so read the standard beside it.
These are 3M's published results, not our testing. For a permit or a fire marshal, request the current certificate for your product and lot. Nothing here replaces the authority having jurisdiction's approval. We install film; we do not certify it.
Every rating on file
| Standard | Result | Specimen mounted on | Evidence basis | Source |
|---|---|---|---|---|
| ASTM E84 | 3M states in writing that 7125 and 7725 meet Class I (A) with a smoke developed rating of 450 or less. Flame-spread and smoke index figures were not present in the retrieved document. | Not stated in the retrieved pages | Tested | 3M — Product Flammability Information, Scotchcal ElectroCut 7125 and 7725 |
3M states the class in writing; the numeric indices were not in the document we retrieved, so we publish the class and not numbers we did not read.
What to hand a fire marshal
- ASTM E84 (Tested): the report cited in that row tests this product to that standard — hand it over when that standard is the one the fire marshal asked for (a slip or EU test does not answer an ASTM E84 request). A named third-party report tests this exact product.
Related references
This film is one of 16 in the 3M Graphic Film Fire-Rating Matrix, which explains the three evidence bases and the ASTM E84 classes. What the building will accept is the other half of the question: the Venue Graphics-Rules Index covers flame-certification rules at 34 U.S. convention venues.
Need this film installed where a fire marshal will look?
Send the venue, the surface and the deadline — we'll spec film with the certification your AHJ wants and install it.